Polyvinyl Butyral PVB Interlayer Film Manufacturer – Page 12

how to make solar panel by yourself in simple way wth EVA film.flv

how to make solar panel by yourself in simple way wth EVA film.flv Watch on Posterous

Silicone Rubber Sheet for Solar Cell Module Laminating Machine and
Encapsulation Line

+Made of self-developed special formula to high improve the properties
of silicone sheet like: acid-resistance, other chemical
substance-resistance, high temperature resistance, and great tensile
strength and tear/scrape resistance,

Silicone Rubber Sheet for Muti-layer Laminator, Fully Cycle Automatic
Laminator, BIPV Laminator, Semi-automatic Laminator, a-Si Module
Laminator

+Product Description：
Great Acid resistance
Chemical agents resistance，
High temperature resistance，
Great tensile strength
Great tearing strength
Highly prolong useful life

Silicone Rubber Sheet for Muti-layer Laminator, Fully Cycle Automatic
Laminator, BIPV Laminator, Semi-automatic Laminator, a-Si Module
Laminator

+PRODUCT SPECIFICATIONS:
Thickness: 3mm thickness (If you need other thickness, please inquiry us.)
Maximum width: 3800mm without any join
Customization available according to customer’s requirements.

Silicone Sheet for Muti-layer Laminator, Fully Cycle Automatic
Laminator, BIPV Laminator, Semi-automatic Laminator, a-Si Module
Laminator

UCOLIN SILICONE TECH
-Silicone Rubber Sheet for Solar Cell Module Laminating Machine and
Encapsulation Line
(2)-Silicone Sheet for EVA Glass Laminating Machine
(3)-Silicone Bag for PVB Glass Laminating Auto-clave
(4)-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy
Glass Laminating
(5)-Contact Us: uc@ucolin.com / www.ucolin.com
umewe360@gmail.com/ umewe360@hotmail.com

Useful Advice for Solar Cell Module Lamination:

+ EVA FILM (ETHYLENE VINYL ACETATE) and PVB FILM (POLYVINYL BUTYRAL)
is needed for solar cell module lamination as a hot melt adhesive
film.

+ Silicone Sheet Installation Advice:
-Choose unique anti-folded design in the upper chamber, that can
prolong the use life of silicone sheet and improve the quality of the
solar modules.
-Vacuum sealing tape is installed upside, which enables installation
easier and and prolong the use life of vacuum sealing tape.
-Aluminum frame flange can speed up easy connection when unloading
clamps, which make replacement of silicone sheet more efficiency, only
need about ten minutes.

+Best Vacuum System
With best silicone sheet, you also need other best device to build a
best vacuum system, and here are 3 tips.
-Choose Germany technology for vacuum system.
-Choose best brand vacuum pump. German LEYBOLD brand vacuum pump is
very good at high vacuum speed and low work noise.
-German EBRO brand’s butterfly-shaped vacuum valve is well known as
reliable working stability and long use life and easy maintenance.

+ Building Fully-Automatic Turn-Key Line
To build fully-automatic turn-key line, you need following devices:
-Glass Washer
-Soldering Stringer
-EVA, TPT Cutting Machine
-Lay-up Equipment
-Laminator
-Edge Trimmer Machine
-Online Tester
-Corner Press/ Framing Press Equipment
-Washer Equipment
-Simulator Tester
-Simulator Tester
-Packaging Machine

how to make solar panel by yourself in simple way wth EVA film.flv

how to make solar panel by yourself in simple way wth EVA film.flv Watch on Posterous

Silicone Rubber Sheet for Solar Cell Module Laminating Machine and
Encapsulation Line

Silicone Rubber Sheet for Muti-layer Laminator, Fully Cycle Automatic
Laminator, BIPV Laminator, Semi-automatic Laminator, a-Si Module
Laminator

+Product Description：
Great Acid resistance
Chemical agents resistance，
High temperature resistance，
Great tensile strength
Great tearing strength
Highly prolong useful life

Silicone Rubber Sheet for Muti-layer Laminator, Fully Cycle Automatic
Laminator, BIPV Laminator, Semi-automatic Laminator, a-Si Module
Laminator

Silicone Sheet for Muti-layer Laminator, Fully Cycle Automatic
Laminator, BIPV Laminator, Semi-automatic Laminator, a-Si Module
Laminator

Useful Advice for Solar Cell Module Lamination:

+ EVA FILM (ETHYLENE VINYL ACETATE) and PVB FILM (POLYVINYL BUTYRAL)
is needed for solar cell module lamination as a hot melt adhesive
film.

which will do harm to the adhesion strength.

HOW TO SOLVE ADHESIVE STRENGTH OF EVA FILM FOR LAMINATED GLASS

Importance:
The adhesive strength of EVA Film is very important for laminated
glass. The adhesion will affect the safety of laminated glass and the
delamination of laminated glass.
So, which factors will influence the adhesion of EVA Film:

1.The type of EVA Film
Generally speaking, the super-transparent EVA Film is stronger in
adhesion than the normal transparent EVA Film. The outdoor type EVA
Film is stronger in adhesion than the indoor type of EVA Film.

2.The manufacturer of the EVA Film
Because different EVA Film manufacturer has different formula of
producing EVA Film. So the adhesion of the EVA Film will be different.

3.Heating temperature of the EVA Film
When laminating the EVA Film, the heating temperature will affect the
cross link reaction and coupling reaction, which will lead to the
adhesive strength of the EVA Film.

4. The Heating Time
The heating time must be long enough for the cross link reaction and
coupling reaction to be fulfilled completely.

5.The storage of the EVA Film
If you open the package of the EVA Film, then don’t use up, the left
EVA Film may absorb some moisture, which will do harm to the adhesion
strength.

All rights reserved by:
All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【Product 2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【Product 3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

3.Heating temperature of the EVA Film

HOW TO SOLVE ADHESIVE STRENGTH OF EVA FILM FOR LAMINATED GLASS

2.The manufacturer of the EVA Film
Because different EVA Film manufacturer has different formula of
producing EVA Film. So the adhesion of the EVA Film will be different.

4. The Heating Time
The heating time must be long enough for the cross link reaction and
coupling reaction to be fulfilled completely.

5.The storage of the EVA Film
If you open the package of the EVA Film, then don’t use up, the left
EVA Film may absorb some moisture, which will do harm to the adhesion
strength.

for the cross link reaction and coupling reaction to be fulfilled completely.

HOW TO SOLVE ADHESIVE STRENGTH OF EVA FILM FOR LAMINATED GLASS

2.The manufacturer of the EVA Film
Because different EVA Film manufacturer has different formula of
producing EVA Film. So the adhesion of the EVA Film will be different.

4. The Heating Time
The heating time must be long enough for the cross link reaction and
coupling reaction to be fulfilled completely.

5.The storage of the EVA Film
If you open the package of the EVA Film, then don’t use up, the left
EVA Film may absorb some moisture, which will do harm to the adhesion
strength.

2-When you make colored laminate glass in same design with the long time storage colored EVA Film, please make small samples too to make sure the color of EVA Film is not change among the storage.

7 Tips of Manufacturing Safety Glass with EVA Hot-melt Dry Adhesive Film
By Peter Shin helloglass.com

Attentions for Making Laminated Glass with Colored EVA Film
Because of the specialty of EVA Film, when you making high quantity of
colored laminated glass with colored EVA Film.

1-Carefully use different orders of colored EVA Film in one design,
even you order from same EVA Film manufacturers, the color of the EVA
Film may be a little different in different producing schedule.
If you use colored EVA Film of different orders in one design, make
you sure you make small samples to compare the color effect.

2-When you make colored laminate glass in same design with the long
time storage colored EVA Film, please make small samples too to make
sure the color of EVA Film is not change among the storage.

Attentions when manufacturing laminating glass with EVA Film in rainy day
In rainy days, the humidity in the air is high.
And also, it’s easier for the surface of glasses and EVA Interlayer
film to catch the humidity.
The humidity in the surface of glasses and EVA Film will do harm to
the adhesive of EVA Film, sometimes will cause bubbles.
So, when in rainy days, please pay attentions to the processing room,
and double clean the surface of the glasses, and seal the EVA Film
roll, when you are not using it.
And also you can prolong the low temperature period to dry the humidity away.

All rights reserved by CNC-INTERLAYER TECH:
【Product 1】CNC-Force® EVA INERLAYER FOR ARCHITECTURAL LAMINATED GLASS
【Product 2】CNC-Smart® SMART FILM FOR PRIVACY SWITCHABLE GLASS
【Product 3】CNC-Shield® PVB INTERLAYER FOR AUTOMOTIVE WINDSHIELD GLASS
Web: www.CNCnext.com www.HelloGlass.com
Mail: cnc@cncnext.com
benext77@gmail.com/
benext77@hotmail.com

Attentions for Laminating EVA FILM With Decorative Interlayers
by Peter

The differences between laminating EVA Film and Laminating PVB Film is
that EVA film’s melt index is higher than PVB FILM, so glass
laminating with EVA Film is more convenient to interlayered some
decorative films, like fabric or melt wet.
So many glass processing factories making decorative laminated glass
sandwiched with all kinds of decorative interlayers by EVA Film.
But there are some tips:
1-Every time, you adopt new decorative interlayers, make sure you do
some test to check if the interlayer is friendly with EVA Film.
Maybe of the printing ink or other dye materials, then decorative
interlayer have some chemical substances that can do harm to EVA Film.

2-Make sure the design of the decorative interlayers is dry already
before laminating EVA Film.

3. Make sure you understand the how high temperature the decorative
interlayer can stand, the interlayers should stand higher temperature
than the EVA Film processing temperature.

Avoid Leaking of EVA Film inside Laminated Glass
The principle of making laminated glass is heating and vacuuming
(pressing the glass to squeeze out the air).
And when heating ,the EVA Film melt into liquid and it’s melt index is
higher than PVB Film. So when vacuuming (the glasses get the
pressure), the EVA Film near the edges of the pre-laminated glass will
leaking out.
And if the EVA Film is leaking out too much, the edges of the
laminated glass may have bubbles around.
There are two ways to solve this problem:
(1) -Use the tape to seal the pre-laminated glass, but make sure you
make some small holes on the tape to help vacuuming.
(2)-f you make small laminated glass, you can put some woods
surrounding the pre laminated glass. The surrounding woods should be
as high as the pre-laminated glass. Which can make sure that the
pressure is even on the pre-laminated glass.

Cooling the Laminated Glass after Heating
If get the laminated glass out of the silicone vacuum bag too early,
the temperature of the laminated glass is still higher than the room
temperature, if the balance is too much, the laminated glass may get
burst, or there may be some bubbles around the edges.
In summer, if the room temperature is high, you can use fan to help
cooling the glass.
But anyway, don’t stop vacuuming until the temperature of laminated
glass is close to the room temperature.

Attentions for Edging Laminated Glass With EVA Film
1-Don’t edge the laminated glass until the laminated glass with EVA
Film has been cooled for 24 hours. Because if you edging too early may
cause the delamination in the edges of EVA laminated glass.

2-It’s better if you can edging the glasses before laminating with EVA
Film, then you don’t have to edge the EVA laminated glass after
heating.

3- If you laminated with some decorative interlayer inside the glass,
and the decorative interlayer is easy to absorb water, then you should
edging the glasses before laminating with EVA Film. Because if you
have to edge after heating, the decorative interlayer may absorb water
and lead to the delamination.

4-Please use the gentle grinding wheel to edge the EVA laminated glass
First in first out:RULE OF STORAGE OF EVA FILM
BY PETER SHIN
When we talking about storage of EVA Film.
Most EVA Film manufacturers will guarantee that self life of EVA Film
for laminated glass is 6 months to 1 years.
So when store the EVA Film, please remember “first in first out” rule.
Make sure you use the EVA film you order early.
And also make sure you use the EVA Film during the self life period.
Because after the EVA FILM expired, maybe the adhesive strength,
impact strength and transparency will be decline.

6)-excellent drying property 7)-film-forming properties is good, and no powder delamination, coating film is strong and tough. 8)-the conductive glue is not easy to precipitate

Pure Sliver Conductive Glue for Smart Glass Film Busbar
www.helloglass.com

1-Usage:
apply to cell phones, computers and electronic
information&communication equipment, precision equipment and so on.

2-Features:
1)-has excellent electromagnetic wave insulating effect;
2)-good adhesion to ABS, PC, ABS / PC, PA, HIPS or metal parts;
3)-100% pure silver powder medium, excellent conductive properties
4)-excellent resistance to abrasion
5)-excellent resistance to humidity
6)-excellent drying property
7)-film-forming properties is good, and no powder delamination,
coating film is strong and tough.
8)-the conductive glue is not easy to precipitate

3-Technical Data:
Performance Indicators PS4741
Solid powder (%) 47±1
Resistance （Ω） 0.015/Sq/0.5Mil
Insulating rate （db） More than 80
Recommended Dry Film Thickness（μm） 10~12
Recommended dilution ratio (weight ratio) 1:0.7~0.8
Diluent Ethanol(99.9%)
Time for solidify at room temperature
after spraying（min） 1~2
Drying Conditions 60℃*20min
Ideal spraying area（㎡/L） 30
Adhesion （%） 100
RCA500 times test good
Environmental Humidity test 85 ℃, 85% relative humidity seven days
under the same resistance value

4-Using Manul:
-Surface Treatment. First of all, use IPA or ethanol to clean the surface.
2)-Mix sufficiently before coating. Stirring to void subsidence.
3)-Don’t let conductive glue touch your skin,cloth,or eye.
4)-Don’t let conductive close to fire or combustibles.
5)-Wear glove when use the conductive glue. Wash your hands completely
after you use
conductive glue.
-Use conductive glue in ventilation room.

1-Usage: apply to cell phones, computers and electronic information&communication equipment, precision equipment and so on.

Pure Sliver Conductive Glue for Smart Glass Film Busbar
www.helloglass.com

1-Usage:
apply to cell phones, computers and electronic
information&communication equipment, precision equipment and so on.

Pure Sliver Conductive Glue for Smart Glass Film Busbar

Pure Sliver Conductive Glue for Smart Glass Film Busbar
www.helloglass.com

1-Usage:
apply to cell phones, computers and electronic
information&communication equipment, precision equipment and so on.

of colored EVA Film in one design, even you order from same EVA Film

7 Tips of Manufacturing Safety Glass with EVA Hot-melt Dry Adhesive Film
By Peter Shin helloglass.com

Attentions for Making Laminated Glass with Colored EVA Film
Because of the specialty of EVA Film, when you making high quantity of
colored laminated glass with colored EVA Film.

2-When you make colored laminate glass in same design with the long
time storage colored EVA Film, please make small samples too to make
sure the color of EVA Film is not change among the storage.

Attentions for Laminating EVA FILM With Decorative Interlayers
by Peter

2-Make sure the design of the decorative interlayers is dry already
before laminating EVA Film.

3. Make sure you understand the how high temperature the decorative
interlayer can stand, the interlayers should stand higher temperature
than the EVA Film processing temperature.

2-It’s better if you can edging the glasses before laminating with EVA
Film, then you don’t have to edge the EVA laminated glass after
heating.